RM-Z250

MSRP

$13,190 Ride Away

or $70p/w*

Calculate
logo

RM-Z250 2024

$13,190 Ride Away

Calculate OR FROM $70p/w*

logo

Take Full Control

The 250 class in motocross doesn’t forgive the slightest weakness. That’s why we completely redesigned the RM-Z250 to achieve a higher level of performance in “Acceleration, Turning, and Braking” necessary to win in this ultra-competitive arena.

Intensive work by our engineers has once again made the RM-Z250 the leader out of the gate, with the engine featuring increased power across the board and class-leading electronics including WiFi tuning capability, a lighter frame and swingarm plus updated KYB suspension for even better handling, modern styling design, and a laundry list of other updates to make it the most potent motocross bike in its class.

MX Tuner 2.0

Standard with every new MY24 RM-Z250 purchased, the plug and play MX Tuner 2.0 allows users to alter the engine mapping via the intuitive smartphone WiGET app, available on iOS and Android devices.

The WiGET app comes with several pre-installed factory settings for easy tuning for different riding styles and track conditions. For the more experienced tuner, the possibilities are practically endless with the ability to create fully customised maps with specific settings for 36 points of ignition timing and 36 points of fuel injection delivery.

 

logo

Premium KYB Suspension

The 49mm KYB coil spring fork replaces the previous model’s PSF2 air fork. Featuring a unique design that provides a progressive damping setup offering excellent compliance over small bumps while firming up deeper into the stroke to handle bigger hits such as harsh jump landings. Upper and lower triple clamp design has been optimised for rigidity while cutting 60 grams.

Out back, the rear suspension linkage ratio has been changed to firm up short stroke movement while optimising longer suspension action for better traction, and is 14.9 grams lighter than previous. The fully adjustable KYB rear shock has an improved range of adjustment with both high and low speed compression and  rebound damping.  The rear spring is constructed using thinner but stronger wire (feedback from MotoGP technology)  and is 370 grams lighter than before.

logo

More Powerful Engine

  • Cylinder Head Design

    Centre-port cylinder head design contributes to increased output and throttle response by approximately 5%.

  • Dual-Fuel Injectors

    The fuel injection system now features two injectors. Instead of using a single injector that can compromise low-end fuelling in order to supply enough fuel for top-end power, the primary injector delivers precise low-rpm fuelling while a secondary injector at higher rpm provides the extra fuel needed.

  • Increased Fuel Pressure

    Increased by 17% over the previous model and promotes the effective mixing of air and fuel, resulting in improved throttle response.

Suzuki Holeshot Assist Control (S-HAC)

All the power in the world  won’t do any good if you can’t transfer it to the ground, and Suzuki’s innovative electronics work transparently with the rider for maximum acceleration on any type of dirt or track conditions.  Suzuki’s  third-generation traction management system, with a significantly updated S-HAC (Suzuki Holeshot Assist Control) system and more powerful ECM (engine control module).

 Suzuki’s RM-Z250 goes another step further with the fourth-generation system featuring updated ECU software. The RM-Z250’s S-HAC system monitors throttle position and gear position in order to adjust ignition timing for maximum acceleration through the three critical stages of a motocross start: releasing the clutch, getting drive over the starting gate, and then powering  down the start straight.

Three settings are available

A-mode: intended for hardpack surfaces where controlling wheelspin is paramount.
B-mode: for normal dirt conditions with good traction.
OFF:  For normal unassisted take-offs. 

  • Ergonomics

    Renthal Fatbar Handlebars

    Fitted as standard equipment , the top-shelf Renthal aluminium Fatbar offers more strength and less vibration than standard size aluminium handlebars.

  • Front Brake

    270mm Solid Wave Rotor

    The front brake disc diameter has been increased from 250mm on the previous generation to 270mm and the brake pad material has been optimised for more linear response characteristics as you brake harder.

  • Eelectronics

    Rich & Lean Couplers

    Riders can adjust the engine performance to suit varied track conditions, by plugging in either of two additional fuel-setting couplers to make the most of any riding conditions. Riders can also overwrite these plugs with new maps using the MX Tuner 2.0.

  • Fuel Tank

    6.3L

    Material changed from aluminium to resin, saving 312g.

Specs

  • Displacement

    249cc
  • Engine

    single-cylinder-liquid-cooled-dohc
  • Transmission

    5-speed-constant-mesh
  • Starter

    primary-kick
  • Front Suspension

    48mm-kyb-dual-chamber-inverted-spring-fork-adjustable-compression-and-rebound-damping
  • Rear Suspension

    link-type-kyb-shock-with-adjustable-high-and-low-compression-and-rebound-damping-and-spring-preload
  • Front Brakes

    nissin-twin-piston-caliper-270mm-wave-disc
  • Rear Brakes

    nissin-single-piston-caliper-240mm-wave-disc
  • Length

    2185mm
  • Width

    835mm
  • Height

    1255mm
  • Wheelbase

    1485mm
  • Seat Height

    955mm
  • Fuel Capacity

    6-3l
  • Wet Weight

    106Kg
  • Warranty

    n-a
Show More

Find your RM-Z250

Enter your postcode to find RM-Z250 stock near you.

RM-Z250
Rail ruts like never before

Build and order

GENUINE ACCESSORIES

Explore the full range of Genuine Suzuki  Accessories  available for the RM-Z250

SHOP ACCESSORIES